3-Cup Anemometer

Aside from use with Maximum wind speed indicators, our 3-cup anemometers can be used with any device that will accept a frequency or pulse input. Common 3-cup anemometer applications include:

-  Environmental monitoring
-  Crane safety - wind load
-  Regulating water flow based on wind speed
-  Any controller that relies on a wind speed reading

For wind energy applications, please visit NRG Systems

Wind Distributor & Vane

Used with Maximum wind direction indicators, as well as applications where high resolution (greater than 22.5º) wind direction is not a requirement. Wind distributor & vanes are used in:

-  Environmental monitoring
-  Fountain control
-  Greenhouse window control
-  Sporting events - ballooning, parachuting, track & field

For wind energy applications, please visit NRG Systems

Temperature Sensor

The same sensors that are used by Maximum's Mini-Max, Criterion, Mystic and Summit temperature indicators to measure air and water temperature, are also applicable for the following uses:

-  Environmental monitoring
-  Pools, spas and boats
-  Any device that can accept a thermistor input

Accurate to +/- 0.5ºC (1ºF) from -40ºC to 50ºC

Rainfall Collector

Used with Maximum's Rainwatch rainfall indicator, this rainfall collector can be used with most pulse counting rainfall indicators, as well as any devices which can accept a switch closure input. Applications for rain collectors include:

-  Irrigation controllers
-  Environmental monitoring devices
-  Agriculture